Description of basic type groups
01 -Commercial rolls and sheets
02 - Slotted-type boxes  Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided.
03 - Telescopic-type boxes  Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box.
04 - Folder-type boxes and trays  Folder-Type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and cover. The boxes can be set up without stitching or taping. Locking tabs, handles, displays panels, etc., can be incorporated in the design.
05 - Slide-type boxes  Slide-type boxes consist of several pieces of liners and sleeves sliding in different directions into each other. This group also includes outside sleeves for other cases.
07 - Ready-glued boxes  Ready-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up.
09 - Interior fitments  Interior fitments such as inside liners, pads, partitions, dividers, etc., whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.